Product Code: TSISTM TOYOSILICONE STEAM HOSE

  • RoHS2 Certified

TOYOSILICONE STEAM HOSE (For steam/high-temperature water)

The TOYOSILICONE STEAM Hose is a steam hose ideal for steam drainage and equipment steam washing in food processing plants and cosmetics plants. *It is not suited to food transport. Use hoses with one end open.

Half the weight of the conventional steam hose and flexible for easy piping, it greatly reduces the amount of work required. Prevents contamination from hose fragments, as the hose surface is less likely to crack even after long-term use. Low-odor with no smell of rubber, it reduces product odor transfer and discomfort due to odors, developed as a hose intended to improve workability and food safety.

The hose can be used for up to 8 hours of continuous steam washing (with one end open) per day, with an extremely long life of roughly 4.5 months (before replacement) with steam at 140°C (0.3MPa). Improve productivity through this lightweight, flexible, crack-resistant hose.

As well, it can also be used for high-temperature water at 100°C or higher, with dedicated couplings and hose assemblies available for greater safety and reduced maintenance.

* It is the successor to the previous models TSITH140.

Click here for hose flexibility and weight comparison data
Click here for a comparison of crack durability
Click here for a comparison of steam hose odor

◆　Click here for a list of heat resistant hoses
◆　Click here for heat-resistant suction hoses for food transportation
◆　Click here for Heat resistant pressure feeding braided hose for food transportation

Important

Warning
When using for steam, the saturated steam pressure should be 0.3 MPa (140°C) or less, and the hose should be used intermittently (max. 8 hours of continuous use per day) with one side open.Never use the hose in steam-tight conditions. Doing so will shorten the service life of the hose. When using steam, be sure to perform regular inspections and replacements based on the “Conditions and service life (replacement) guidelines.”

(1) Never use with the hose nonpolar organic solvents (benzene, toluene, hexane, etc.), hydrocarbon halogenide (methylene chloride, trichloroethane, etc.), high-concentrate strong acid or alkali, mineral oil, or vegetable or animal oil of 70 degrees centigrade or higher.

(2) Note that silicone rubber has high gas permeability.Use caution when using this product with gases.Be sure to check “Precautions for Using Our Products Safely” before choosing a product.

  • Guidance
  • Use Example
  • Standards Chart by Size
Use ： Steam/high-temperature water (for steam drainage, equipment steam washing, heat-resistant high-temperature water piping)
Fluid ： Water (Non-drinkable)Steam
Function ：
  • Cold Resistant
  • Flexible
  • Heat Resistant
  • Low Elusion
  • Low Odor
  • No Waste Sorting Required
  • Pressure
Certifications ： Food Compliancy no. 595
RoHS2 Compliant
Method ： Primary Material: Silicone
Materials: Special heat-resistant yarn
Diameter: 9.5mm~25.4mm
Temperature Range: -30℃ ~140℃

Material / Service

Feature:

  • Lightweight, flexible, and easy to handle for improved productivity

  • Less likely to crack, enabling long life and preventing hose fragment contamination

  • Low-odor, sharply reducing unpleasant rubber smells

  • Complies with various laws and regulations for safety and security

    • Safe and secure due to its compliance with the Food Sanitation Act (Complying with Notice of the Ministry of Health, Labour and Welfare No. 595, 2012) ,FDA (US Food and Drug Administration) registered product (FDA DMF Type II No.25486 Registration) and corrected RoHS2 regulations.

    *This hose does not use phthalate plasticizers

  • Dedicated couplings enable greater safety and reduced maintenance

    • For the Hose Piping Easy Kit, which prevents fluid leaks and hose disconnections while simplifying mounting and reducing maintenance, see here
    • For hose assemblies usable with heat-resistant high-temperature water piping in various machinery, see here
    • Thread cast-off prevention structure prevents thread cast-off punctures near couplings

How Toyox Hoses Resist Rupture and Twisting

RoHS directive

Related Videos:

  • Image of ease of handling

Worksite Improvement Case Studies

Recommendation

  • Proposals by applicationMolding plants Chiller and mold temperature regulator
    Cut loss and production problems for higher production efficiency! 1. Reduced pr...

    See More

Standards Chart by Size: Temperature Range -30℃ ~ 140℃

Product Code Inner dia. x Outer dia.
(mm)		 Use pressure
Steam~140℃
(MPa)		 Use pressure
High-temperature water~140℃
(MPa)		 Standard weight
(kg/roll)		 Standard length
(m)		 Minimum bend radius
(mm)
TSISTM-1520 15.9×24 0～0.3 0~0.5 6.2 20 150
TSISTM-9 9.5×16 0～0.3 0~1.0 3.2 20 100
TSISTM-12 12.7×19.5 0～0.3 0~0.5 2.1 10 130
TSISTM-15 15.9×24 0～0.3 0~0.5 3.1 10 150
TSISTM-19 19×28 0～0.3 0~0.5 4.1 10 180
TSISTM-1920 19×28 0～0.3 0~0.5 8.2 20 180
TSISTM-25 25.4×35.5 0～0.3 0~0.5 5.9 10 220
TSISTM-2520 25.4×35.5 0～0.3 0~0.5 11.8 20 220

Packaging: Boxed
Coloring: Gray/green line
*TSISTM-1520, TSISTM-1920 and TSISTM-2520 are low in stock; be sure to contact TOYOX regarding inventory and delivery dates.
When using for steam, the saturated steam pressure should be 0.3 MPa (140°C) or less, and the hose should be used intermittently (max. 8 hours of continuous use per day) with one side open. Never use the hose in steam-tight conditions. Doing so will shorten the service life of the hose. When using steam, be sure to perform regular inspections and replacements based on the “Conditions and service life (replacement) guidelines.”

For barb fittings, use a nipple diameter 5% to 15% larger than the inner diameter of the hose (depending on the hose inner diameter).
*Click here for a simple size chart

Genuine Couplings : 14 Coupling Name TOYOCONNECTORTOYOCONNECTORTOYOCONNECTORHose AssembliesHose AssembliesKAMLOK COUPLERKAMLOK COUPLERKAMLOK COUPLERKAMLOK TWINLOK TYPE COUPLERKAMLOK TWINLOK TYPE COUPLERKAMLOK TWINLOK TYPE COUPLERKAMLOK ADAPTERKAMLOK ADAPTERKAMLOK ADAPTER
Hose Size Hose Connection Cap NutCap NutCap NutFastenerFastenerHosebandHosebandHosebandHosebandHosebandHosebandHosebandHosebandHoseband
Coupling Specification Male ThreadFerruleFerruleMale ThreadFemale ThreadCouplerCouplerCouplerCouplerCouplerCouplerAdapterAdapterAdapter
Primary Material SUS SUS SUS Brass Brass Aluminum Alloy SUS PP Aluminum Alloy SUS PP Aluminum Alloy SUS PP 
Product no. TC3-SS TC3-FSG TC3-FS H01B H04B 633-C-AL 633-C-SST 633-C-PP 633-CL-AL 633-CL-SST 633-CL-PP 633-E-AL 633-E-SST 633-E-PP
Certification
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
  • RoHS2 Certified
Hoses
Product Code		 Inner dia.
(mm)		 Outer dia.
(mm)
TSISTM-9 9.5 16 ◯-◯◯◯---------
TSISTM-12 12.7 19.5 ◯-◯◯◯---------
TSISTM-1520 15.9 24 ◯◯◯-----------
TSISTM-15 15.9 24 ◯◯◯-----------
TSISTM-19 19 28 ◯◯◯◯◯◯◯◯◯◯-◯◯◯
TSISTM-1920 19 28 ◯◯◯◯◯◯◯-◯◯-◯--
TSISTM-25 25.4 35.5 ◯◯◯◯◯◯◯◯◯◯◯◯◯◯
TSISTM-2520 25.4 35.5 ◯◯◯◯◯◯◯-◯◯◯◯--

Related Products