Product Code: TC6-S TOYOCONNECTOR-TC6-S

  • RoHS2 Certified

TOYOCONNECTOR TC6-S Coupling

Couplings for factory pipe lines (Toyox hose genuine couplings)

TOYOCONNECTOR is a hose manufacturer designed coupling exclusively for TOYOX hoses.
(Material: stainless steel/Clamp type/Couplings Specification: Male Thread)

It is a hose coupling that is useful in improving productivity, safety and energy saving properties by preventing problems such as insufficient flow, fluid leakage and hose disconnection between the hose and coupling, and improving the installation process of the hose to the coupling.

For better productivity, safety and energy saving properties, we recommend that you select hoses suitable for your specific application and conditions.

◆　Click here for a list of other hose fittings
◆　Click here for Brass male thread hose fittings

Important

*Because of the presence of threads,This is not appropriate for sanitary hoses (such as used for foods). Use for foods may result in safety issues in the product.
*The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer’s hose.

  • Guidance
  • Coupling Design Chart
  • List of Compatible Hoses
Connection Surface Connection Method Inner Diameter for Hose (mm) / Coupling Specification
Hose Side Clamp 32, 38, 50
Device Side Male Thread R1-1/4, R1-1/2, R2
Product no. ： TC6-S
Fluids ： Air Chemicals Solvents, Paint Oils Water (Non-drinkable)
Primary Material ： SUS
Materials Detail ： Nipple: SCS13 (SUS304 equivalent)
Clamp: SCS14 (SUS316 equivalent)
Rubber cap: NBR
Spacer, Washer (50 size only): Polyacetal
Bolt: SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant: NSF "H1" registered grease
Functionality ： Easy to installEnergy savingPrevents leakage and disconnectionReusableStandardization of work
Certification ： RoHS2 (RoHS Revised) Certified

Material / Service

Feature:

  • Prevents leaks and disconnections

    Hose insertion is easy, and the clamp fits on with no gap, preventing hose disconnections and fluid leaks.

  • Time savings

    Hose insertion and removal is easy for increased efficiency.

  • Standardization of work (hyojunka)

    Fasten the clamp fully to complete the operation. Hose insertion is simple and can be performed reliably and consistently no matter who does it.

  • Reduced pressure loss

    There is less fluid leakage, and with a larger effective surface area (hole diameter) than a barb fitting, there is less pressure loss.

  • Durable

    The hose end fitting and nipple are integrated, to keep the fluid from coming into contact with the packing inside the coupling. Fluids only need to be resistant to the coupling body but not the packing.

  • Waste reduction

    Coupling units can be reused, reducing waste and cutting costs.

  • Resistance to vibration

    Hose problems due to leaks and disconnections caused by vibration are prevented, and earthquake and other disaster preventive maintenance, as well as restoration work after a disaster, are made easy.

  • Easy attachment with no special tools

    The clamp can be tightened with a motor wrench, Allen wrench and other types of wrenches.

TC6-S cross-sectional area ratio

Coupling structure

Worksite Improvement Case Studies

Note: Because of the presence of threads, this is not appropriate for sanitary hoses (such as used for foods).
Use for foods may result in safety issues in the product.

Part Number Thread Specification Dimensions (mm) Weight Packing Unit
L Φd1 F HEX1 HEX2 g pc
Coupling Standards Chart · Schematic Drawing · TC6-S TC6-S32-R1-1/4 R1-1/4 86.0 27.0 81.0 46 6 550 4
TC6-S38-R1-1/2 R1-1/2 93.0 32.0 88.0 55 6 745 4
TC6-S50-R2 R2 110.0 43.0 106.0 70 8 1,240 2
Nipple: SCS13 (SUS304 equivalent)
Clamp: SCS14 (SUS316 equivalent)
Rubber cap: NBR
Spacer, Washer (50 size only): Polyacetal
Bolt: SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant: NSF "H1" registered grease
Compatible Hoses : 13Hoses
Name		TOYOFUSSO SOFT-S HOSE　FFYSTOYOFUSSO-S HOSEECORON HOSETOYOFUSSO HOSEECORON-S HOSETOYOFOODS HOSETOYOFOODS-S HOSETOYORING-F HOSEHYPER TOYORON HOSETOYORON HOSESUPER TOYORON HOSETOYOSPRING HOSETOYORING HOSE
Material : SUS
Primary MaterialTetrafluoride Based Fluorine ResinTetrafluoride Based Fluorine ResinPolyolefinTetrafluoride Based Fluorine ResinPolyolefinVinylVinylVinylVinylVinylVinylVinylVinyl
Functionality
Chemical Resistant
Flexible
Heat Resistant
Low Elusion
Low Odor
Non-adhesive
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Vacuum
Break Proof
Chemical Resistant
Cold Resistant
Heat Resistant
Low Elusion
Low Odor
Non-adhesive
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Vacuum
Chemical Resistant
Flexible
Low Elusion
Low Odor
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Chemical Resistant
Cold Resistant
Heat Resistant
Low Elusion
Low Odor
No Waste Sorting Required
Non-adhesive
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Break Proof
Chemical Resistant
Flexible
Low Elusion
Low Odor
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Vacuum
Flexible
Heat Resistant
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Break Proof
Flexible
Heat Resistant
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Vacuum
Break Proof
Flexible
Heat Resistant
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Vacuum
Flexible
Heat Resistant
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Flexible
No Waste Sorting Required
Pressure
Transparent
Flexible
No Waste Sorting Required
Pressure
Transparent
Break Proof
Flexible
Pressure
Transparent
Vacuum
Break Proof
Flexible
No Waste Sorting Required
Pressure
Transparent
Vacuum
Product no.FFYSFFSECFFECSTFBTFSTGFHPTTRSTTSTG
CertificationFDARoHS2 CertifiedFDARoHS2 CertifiedRoHS2 CertifiedFDARoHS2 CertifiedRoHS2 CertifiedFDARoHS2 CertifiedFDARoHS2 CertifiedFDARoHS2 CertifiedRoHS2 CertifiedRoHS2 CertifiedRoHS2 CertifiedRoHS2 CertifiedRoHS2 Certified
Product CodeCompatible Hoses
Inner Diameter(mm)		Coupling Specification
TC6-S32-R1-1/432R1-1/4◯◯◯◯◯◯◯◯◯◯◯◯◯
TC6-S38-R1-1/238R1-1/2◯◯◯◯◯◯◯◯◯◯◯◯◯
TC6-S50-R250R2◯-◯◯◯◯◯◯◯◯◯◯◯

*Replacement parts for TC6-S are also used for TC6-B.

Replacement Rubber Cap
Replacement Rubber Cap
Part Number Compatible TOYOCONNECTOR Part Number Packing Unit
pc
TC6-32-G TC6-S32-R1-1/4 4
TC6-38-G TC6-S38-R1-1/2 4
TC6-50-G TC6-S50-R2 2

Rubber seal : NBR

 

Replacement Clamp Set
Replacement Clamp Set
Part Number Compatible TOYOCONNECTOR Part Number Packing Unit
pc
TC6-32-CBSS TC6-S32-R1-1/4 1
TC6-38-CBSS TC6-S38-R1-1/2 1
TC6-50-CBSS TC6-S50-R2 1

Clamp : SCS14 (SUS316 equivalent)
Spacer, Washer (50 size only) : Polyacetal
Bolt : SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant : NSF “H1” registered grease (extreme-pressure grease)

Attachment Method

1 First loosen the bolt and detach the clamp from the nipple, and attach the nipple to the machine. Attachment Method · Model Shown1
2 Pass the rubber cap through the hose.

* Refer to the user’s manual for instructions on how far to insert the rubber cap.

 Attachment Method · Model Shown2
3 Insert the rubber cap all the way to the end of the nipple. Attachment Method · Model Shown3
4 Align the clamp to the nipple groove and temporarily assemble.

* Center the triangle symbol on the rubber cap so there is no gap.

 Attachment Method · Model Shown4
5 Alternately tighten the two bolts evenly until no gap remains. Attachment Method · Model Shown5

Clamp : SCS14 (SUS316 equivalent)
Spacer, Washer (50 size only) : Polyacetal
Bolt : SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant : NSF “H1” registered grease (extreme-pressure grease)

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-S50) to finish tightening the bolt.

Related Products