Couplings for food, beverage, and chemical equipment and facility piping (for Toyox hoses)

TOYOCONNECTOR TC6-F

  • Model | TC6-F
  • Material | Stainless steel

Features

  • Fluid accumulation prevention
  • Leak and disconnection prevention
  • Standardization of work
  • Hygienic

Product features

  • Fluid accumulation prevention

    Hygienic design with a nipple shape that prevents fluid accumulation, making it ideal for food and beverage products.

  • Leak and disconnection prevention

    Hose insertion is easy and the clamp tightens without gaps to prevent the hose from coming loose and leaking fluid.

  • Standardization of work

    Fully tighten the clamp to complete the installation. Even hose insertion is easy, helping ensure uniform installation even when completed by different workers.

  • Hygienic

    Rust-resistant and hygienic stainless-steel design (equivalent to SUS 316L, SUS 304).

  • Overview
  • Support /
    Downloads
  • Case studies
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC6-F

Couplings for food, beverage, and chemical equipment and facility piping (for Toyox hoses)

Hose side
Dedicated clamp
Hose inner diameter (mm)
32, 38, 50
Device side
Ferrule
Coupling specifications
1.5S, 2S
Model No. TC6-F
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
  • Fluid accumulation prevention
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics Solvents and paints
Legal compliance RoHS 2 compliant
Material details Nipple SCS16 (equivalent to SUS 316L)
Clamp SCS14 (equivalent to SUS 316)
Rubber cap EPDM
Spacer, Washer (Only the 50 size) Polyacetal
Bolt SUSXM7 (equivalent to SUS 304)
Lubricant of the bolt screw portion NSF "H1" registered grease

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) Weight (g) No. of packaged items
A B C HEX2 L Φd1
TC6-F32-1.5S 32 1.5S 50.5 43.5 35.7 6 70.5 25 450 4
TC6-F38-1.5S 38 1.5S 50.5 43.5 35.7 6 76.5 31 530 4
TC6-F50-2S 50 2S 64 56.5 47.8 8 88.5 42 890 2

Precautions

*The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that This coupling will function properly if connected to another manufacturer's hose.
*This coupling is not for routine disassembly cleaning.

Compatible Hoses: 13

Coupling material
Hose name ECORON HOSE ECORON-S HOSE TOYOFUSSO HOSE TOYOFUSSO-S HOSE HYPER TOYORON HOSE SUPER TOYORON HOSE TOYOFOODS HOSE TOYOFOODS-S HOSE TOYORING HOSE TOYORING-F HOSE TOYORON HOSE TOYOSPRING HOSE TOYOFUSSO SOFT−S HOSE
Main material Polyolefin resin Polyolefin resin Tetrafluororesin Tetrafluororesin Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Tetrafluororesin
Operating temperature range -5℃~60℃ -5℃~60℃ -20℃~80℃ -20℃~80℃ -5℃~70℃ -5℃~60℃ -5℃~70℃ -5℃~70℃ -5℃~60℃ -5℃~70℃ -5℃~60℃ -5℃~60℃ -5℃~70℃
Model No. EC ECS FF FFS HPT ST TFB TFS TG TGF TR TS FFYS
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC6-F32-1.5S
32
1.5S
TC6-F38-1.5S
38
1.5S
TC6-F50-2S
50
2S
- -
 
 
Replacement rubber cap Product no. Compatible TOYOCONNECTOR part no. Packaging quantity
Pieces
TC6-F32-G TC6-F32-1.5S 4
TC6-F38-G TC6-F38-1.5S 4
TC6-F50-G TC6-F50-2S 2
材質 /
Rubber cap : EPDM

*The replacement parts for the TC6-F are the same as for the TC6-CS.

 
 
Replacement clamp set Product no. Compatible TOYOCONNECTOR part no. Packaging quantity
Pieces
TC6-F32-CBSS TC6-F32-1.5S 1
TC6-F38-CBSS TC6-F38-1.5S 1
TC6-F50-CBSS TC6-F50-2S 1
材質 /
Clamp : SCS14 (SUS316 equivalent)
Spacer , Washer (50 size only) : Polyacetal
Bolt : SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant : NSF “H1” registered grease (extreme-pressure grease)

Attachment Method

  1. 1Loosen the bolts and remove the clamp from the nipple.

  2. 2 Place the rubber cap over the hose.
    *Refer to the instruction manual for the insertion volume of the rubber cap.

  3. 3Insert the hose equipped with the rubber cap into the base of the hose opening of the nipple.

  4. 4Provisionally assemble the clamp in line with the grooves on the nipple.
    *Adjust the triangle marking of the rubber cap to be positioned in the center of the gap.

  5. 5Fasten the 2 bolts evenly while alternating and fasten these until there are no gaps.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-F50) to finish tightening the bolt.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.