Couplings for food, beverage, and chemical equipment and facility piping (for Toyox hoses)

TOYOCONNECTOR TC6-CS

  • Model | TC6-CS
  • Material | Stainless steel

Features

  • Leak and disconnection prevention
  • Easy installation
  • Fluid accumulation prevention
  • Hygienic

Product features

  • Leak and disconnection prevention

    Attaches securely to the hose with a special sleeve construction, eliminating fluid leaks and hose disconnections.

  • Easy installation

    Quicker and easier insertion thanks to the coupling insert being the same size as the hose.

  • Fluid accumulation prevention

    Hygienic design with a nipple shape that prevents fluid accumulation, making it ideal for food and beverage products.

  • Hygienic

    Rust-resistant and hygienic stainless-steel design.

  • Overview
  • Support /
    Downloads
  • Case studies
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC6-CS

Couplings for food, beverage, and chemical equipment and facility piping (for Toyox hoses)

Hose side
Dedicated clamp
Hose inner diameter (mm)
38, 50
KAMLOK
Coupler
Connection size
1-1/2, 2
Model No. TC6-CS
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
  • Fluid accumulation prevention
  • Arm safety lock
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics
Legal compliance RoHS 2 compliant
Material details Nipple, Cam arm SCS14 (SUS316 equivalent)
Fixed plate, Ring, Pin, Spring SUS304
Gasket Silicone rubber
Clamp SCS14 (SUS316 equivalent)
Rubber cap EPDM
Spacer, Washer (50 size only) Polyacetal
Bolt SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant NSF "H1" registered grease
Packing Silicone rubber

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) Weight (g) No. of packaged items
A B F HEX2 L ΦC
TC6-CS38 38 1-1/2" 184 93 88 6 106 54 1050 4
TC6-CS50 50 2" 193 103 106 8 122.5 63.3 1400 2

* Compatible with KAMLOK.

Precautions

*The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer's hose.
*This coupling is not for routine disassembly cleaning.
*Connect with KAMLOK of the same material. It may lead to corrosion (electrical corrosion).

Compatible Hoses: 13

Coupling material
Hose name ECORON HOSE ECORON-S HOSE TOYOFUSSO HOSE TOYOFUSSO-S HOSE TOYOFUSSO SOFT−S HOSE HYPER TOYORON HOSE SUPER TOYORON HOSE TOYOFOODS HOSE TOYOFOODS-S HOSE TOYORING HOSE TOYORING-F HOSE TOYORON HOSE TOYOSPRING HOSE
Main material Polyolefin resin Polyolefin resin Tetrafluororesin Tetrafluororesin Tetrafluororesin Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC
Operating temperature range -5℃~60℃ -5℃~60℃ -20℃~80℃ -20℃~80℃ -5℃~70℃ -5℃~70℃ -5℃~60℃ -5℃~70℃ -5℃~70℃ -5℃~60℃ -5℃~70℃ -5℃~60℃ -5℃~60℃
Model No. EC ECS FF FFS FFYS HPT ST TFB TFS TG TGF TR TS
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC6-CS38
38
1-1/2"
TC6-CS50
50
2"
-
 
 
Replacement Rubber Cap Part Number Compatible TOYOCONNECTOR Part Number Packing Unit
pc
TC6-F 38-G TC6-CS 38 4
TC6-F 50-G TC6-CS 50 4
Rubber cap : EPDM

*The replacement parts for the TC6-CS are the same as for the TC6-F.

 
 
Replacement Clamp Set Part Number Compatible TOYOCONNECTOR Part Number Packing Unit
pc
TC6-F 38-CBSS TC6-CS 38 1
TC6-F 50-CBSS TC6-CS 50 1
Clamp : SCS14 (SUS316 equivalent)
Spacer , Washer (50 size only) : Polyacetal,
Bolt : SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant : NSF “H1” registered grease (extreme-pressure grease)

Attachment Method

  1. 1Loosen the bolts and remove the clamp from the nipple.

  2. 2Pass the rubber cap through the hose.
    *Refer to the instruction manual for the insertion volume of the rubber cap.

  3. 3Insert the rubber cap all the way to the end of the nipple.

  4. 4Align the clamp to the nipple groove and temporarily assemble.
    * Center the triangle symbol on the rubber cap so there is no gap.

  5. 5Alternately tighten the two bolts evenly until no gap remains.
    If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-CS50) to finish tightening the bolt.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.