Couplings for food, beverage, and chemical equipment and facility piping (for Toyox hoses)

TOYOCONNECTOR TC3-FG

  • Model | TC3-FG
  • Material | Stainless steel

Features

  • Fluid accumulation prevention
  • Leak and disconnection prevention
  • Standardization of work
  • Hygienic

Product features

  • Fluid accumulation prevention

    Hygienic design with a nipple shape that prevents fluid accumulation, making it ideal for food and beverage products.

  • Leak and disconnection prevention

    Attaches securely to the hose with a special sleeve construction, eliminating fluid leaks and hose disconnections.

  • Standardization of work

    The cap nut means no bothersome clamp position adjustments or torque control so work can be standardized.

  • Hygienic

    Rust-resistant and hygienic stainless-steel design (equivalent to SUS 316L, SUS 304).

  • Overview
  • Support /
    Downloads
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC3-FG

Couplings for food, beverage, and chemical equipment and facility piping (for Toyox hoses)

Hose side
Cap nut
Hose inner diameter (mm)
15, 19, 25
Device side
Ferrule
Coupling specifications
1S
Model No. TC3-FG
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics Solvents and paints
Legal compliance RoHS 2 compliant
Material details Nipple SCS16 (SUS316L equivalent)
Cap nut SCS13 (SUS304 equivalent)
Sleeve Polyacetal
Packing Silicone rubber

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) Weight (g) No. of packaged items
Width across flats A B C HEX L Φd1
TC3-FG15-1S 15 1S 24 50.5 43.5 23 31 58.5 13 238 10
TC3-FG19-1S 19 1S 27 50.5 43.5 23 36 60.5 17 290 10
TC3-FG25-1S 25 1S 30 50.5 43.5 23 42 66 22.5 392 10

Compatible Hoses: 22

Coupling material
Hose name ECORON HOSE TOYOFUSSO HOSE TOYOFUSSO-E HOSE TOYOFUSSO-S HOSE TOYOFUSSO SOFT HOSE HYPER TOYORON HOSE HYBRID TOYOFOODS HOSE HYBRID TOYORON HOSE SUPER TOYORON HOSE TOYOBIO PRO HOSE TOYOFOODS HOSE TOYORING HOSE TOYORING-F HOSE TOYORON HOSE TOYOSPRING HOSE TOYOSIGNAL HOSE FLAMEBLC HOSE FLAMEBLC HYBRID UL HOSE HYBRID TOYODROP HOSE TOYOFUSSO SOFT−S HOSE ECORON-S HOSE TOYOFOODS-S HOSE
Main material Polyolefin resin Tetrafluororesin Tetrafluororesin Tetrafluororesin Tetrafluororesin Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Soft PVC Tetrafluororesin Polyolefin resin Soft PVC
Operating temperature range -5℃~60℃ -20℃~80℃ -20℃~80℃ -20℃~80℃ -5℃~70℃ -5℃~70℃ -5℃~70℃ -5℃~60℃ -5℃~60℃ -5℃~60℃ -5℃~70℃ -5℃~60℃ -5℃~70℃ -5℃~60℃ -5℃~60℃ -5℃~60℃ -5℃~60℃ -5℃~60℃ -5℃~60℃ -5℃~70℃ -5℃~60℃ -5℃~70℃
Model No. EC FF FFE FFS FFY HPT HTF HTR ST TBP TFB TG TGF TR TS TSG FB FBH HTD FFYS ECS TFS
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC3-FG15-1S
15
1S
- - -
TC3-FG19-1S
19
1S
- - -
TC3-FG25-1S
25
1S
-
 
 

* The replacement parts for the TC3-FG are the same as for the TC3-F, TC3-CS.

Replacement Sleeve Set Part Number Compatible TOYOCONNECTOR Part Number Packing Unit
pc
TC3-F15-RSS TC3-FG15 10
TC3-F19-RSS TC3-FG19 10
TC3-F25-RSS TC3-FG25 10
材質 /
Sleeve : Polyacetal
Packing : Silicone rubber

Attachment Method

  1. 1Twist the cap nut to remove it from the nipple.

  2. 2Pass the hose through the cap nut and then the TC3-FG sleeve with packing.

  3. 3Insert the hose into the nipple.
    For best results, use the table at right to find the correct hose insertion length and mark the hose before inserting.
    As shown in the figure at right, there is a small hole that can be used to check when the hose is inserted to the proper length.

  4. 4As shown in Fig. 1, use a monkey or motor wrench to fasten the flat part of the nipple, and tighten until there is no gap between the nipple and the cap nut.

Attachment Tool

Use a wrench such as a regular adjustable or monkey wrench to finish tightening. Do not, however, use a pipe wrench as it will damage the nut portion.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.