Couplings for food, beverage, and chemical equipment and facility piping (for TOYOSILICONE Hose Series)

TOYOCONNECTOR TC6-FS

  • Model | TC6-FS
  • Material | Stainless steel

Features

  • Fluid accumulation prevention
  • Easy installation
  • Leak and disconnection prevention
  • Hygienic

Product features

  • Fluid accumulation prevention

    Hygienic design with a nipple shape that prevents fluid accumulation, making it ideal for food and beverage products.

  • Easy installation

    Fully tighten the cap nut to complete the installation. Even hose insertion is easy, helping ensure uniform installation even when completed by different workers.

  • Leak and disconnection prevention

    The unique construction allows the hose to be securely inserted to the base of the coupling, preventing hose disconnections and fluid leaks.

  • Hygienic

    Made of rust-resistant, hygienic SCS13 (equivalent to SUS 304) and SCS16 (equivalent to SUS 316L) stainless steel.

  • Overview
  • Support /
    Downloads
  • Case studies
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC6-FS

Couplings for food, beverage, and chemical equipment and facility piping (for TOYOSILICONE Hose Series)

Hose side
Dedicated clamp
Hose inner diameter (mm)
32, 38, 50
Device side
Ferrule
Coupling specifications
1.5S, 2S
Model No. TC6-FS
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
  • Fluid accumulation prevention
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics
Legal compliance RoHS 2 compliant
Material details Nipple SCS16 (SUS316L equivalent)
Clamp SCS14 (SUS316 equivalent)
Sleeve PVDF
Spacer PVDF
Washer (50 size only) PEEK
Bolt SUSXM7 (SUS304 equivalent)
Bolt thread part lubricant NSF "H1" registered grease

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) Weight (g) No. of packaged items
A B C HEX L Φd1
TC6-FS32-1.5S 32 1.5S 50.5 43.5 35.7 6 76 26 575 4
TC6-FS38-1.5S 38 1.5S 50.5 43.5 35.7 6 81 32 695 4
TC6-FS50-2S 50 2S 64 56.5 47.8 8 93.5 44 1100 2

Precautions

*The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer's hose.
*This coupling is not for routine disassembly cleaning.

Compatible Hoses: 4

Coupling material
Hose name HYBRID TOYOSILICONE HOSE TOYOSILICONE HOSE TOYOSILICONE STEAM S HOSE TOYOSILICONE-S HOSE
Main material Silicone rubber Silicone rubber Silicone rubber Silicone rubber
Operating temperature range -30℃~130℃ -30℃~150℃ -30℃~140℃ -30℃~150℃
Model No. HTSI TSI TSISTMS TSIS
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC6-FS32-1.5S
32
1.5S
TC6-FS38-1.5S
38
1.5S
TC6-FS50-2S
50
2S
-
 
 
TC6-FS Replacement Sleeve Set
Replacement Parts Part Number Packing Unit
pc
TC6-FS32-S 4
TC6-FS38-S 4
TC6-FS50-S 2
材質 /
Sleeve : PVDF
 
 
TC6-FS Replacement Clamp Set (without sleeve)
Replacement Parts Part Number Packing Unit
pc
TC6-FS32-CBSS 1
TC6-FS38-CBSS 1
TC6-FS50-CBSS 1
材質 /
Clamp : SCS14 (SUS316 equivalent)
Spacer : PVDF
Washer ( TC6-FS50 only ) : PEEK
Bolt : SUSXM7 ( SUS304 equivalent )
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)

Attachment Method

  1. 1Loosen the bolts and remove the clamp from the nipple.

  2. 2

    Pass the hose through the sleeve.
    *For optimal positioning, mark the hose as shown at right before passing the hose through the sleeve.
    *If the edges are not flush where the sleeve ends meet, adjust them so that there is no overhang.

  3. 3With the sleeve attached, insert the hose to the hose insertion position of the nipple.

  4. 4

    Align the clamp to the nipple groove to initially connect them.
    *If the spacer comes off of the bolt, re-attach the spacer to the bolt before making the initial connection to the clamp.

  5. 5Alternately tighten the two bolts evenly until no gap remains.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-FS50) to finish tightening the bolt.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.