Product Code: TC6-FN TOYOCONNECTOR-TC6-FN

  • RoHS2 Certified

TOYOCONNECTOR TC6-FN Coupling (Dedicated Coupling for HYBRID TOYOFOODS-N Hose)

A coupling for equipment and devices handling foods, beverages, chemicals and the like (Dedicated Coupling for HYBRID TOYOFOODS-N Hose)

TOYOCONNECTOR is a hose manufacturer designed coupling exclusively for TOYOX hoses.
*Compatible with KAMLOK
*ISO2852 ferrule groove compatible item.
(Material: SUS/Clamp type/Couplings Specification: Ferrule)

The structure that suppresses fluid accumulation is sanitary. Reduction of leakage and disconnection troubles will increase production efficiency. Reduction of piping work time and standardization of work.

Important

*It is designed as a coupling dedicated for HYBRID TOYOFOODS-N Hose.
*When connecting the FERRULE, use a packing for ISO ferrule couplings.
*This coupling is not for routine disassembly cleaning.

  • Guidance
  • Coupling Design Chart
  • List of Compatible Hoses
Connection Surface Connection Method Inner Diameter for Hose (mm) / Coupling Specification
Hose Side Clamp 38, 50
Device Side Ferrule 1-1/2(1.5S),2(2S)
Product no. ： TC6-FN
Fluids ： Air Chemicals Drinking Water Foods Oils Water (Non-drinkable)
Primary Material ： SUS
Materials Detail ： Nipple: SUS316L
Clamp: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Rubber cap: EPDM
Spacer · Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF "H1" registered grease
Functionality ： Easy to installLocks safely with armPrevents leakage and disconnectionPrevents liquid poolingReusableStandardization of work
Certification ： RoHS2 (RoHS Revised) Certified

Material / Service

Feature:

  • Easy coupling insertion

    Say goodbye to the insertion difficulties of conventional couplings!
    The coupling is extremely easy to insert into the genuine Toyox hose for improved workflow.

  • Prevents leaks and disconnections

    A dedicated clamp is attached to prevent hose disconnections and fluid leakage.

  • Sanitary

    Designed so that fluids do not accumulate between the coupling tip and the hose for sanitary operation.

Worksite Improvement Case Studies

TOYOCONNECTORTC6-FN
Coupling exterior Schematic Drawing
TC6-FN Coupling Features · Schematic Drawing · TC6-FN
Part Number Coupling Specs Dimensions (mm) Packing Unit FERRULE Specifications
Inch L Φd F A B C HEX pc
TC6-FN38-1.5S 1-1/2” 77.0 31.0 88.0 50.5 43.5 35.7 6 4 1.5S
TC6-FN50-2S 2” 89.0 42.0 106.0 64.0 56.5 47.8 8 2 2S
Nipple: SUS316L
Clamp: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Rubber cap: EPDM
Spacer · Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF "H1" registered grease
Compatible Hoses : 1Hoses
Name		HYBRID TOYOFOODS-N HOSE
Material : SUS
Primary MaterialVinyl
Functionality
Break Proof
Flexible
No Waste Sorting Required
Oil Resistant (Animal and Vegetables)
Oil Resistant (Mineral)
Pressure
Transparent
Vacuum
Product no.HTF-N
CertificationRoHS2 Certified
Product CodeCompatible Hoses
Inner Diameter(mm)		Coupling Specification
TC6-FN38-1.5S381-1/2"(1.5S)◯
TC6-FN50-2S502"(2S)◯
Replacement Parts Product Name Applicable Coupling Part Number Packing Unit
Clamp Set

Details:
Clamp body … 1pc each (left/right)
Bolt … 2pcs
Spacer … 1pc
Washer … 1pc
(50 size only)

TC6-F38-CBSS TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S		 1set
TC6-F50-CBSS TC6-CSN50
TC6-ESN50
TC6-FN50-2S
Rubber caps TC6-F38-GN TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S		 4pcs
TC6-F50-GN TC6-CSN50
TC6-ESN50
TC6-FN50-2S

Clamp body: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Spacer, Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)
Rubber cap: EPDM

*When reusing the TC6-CSN, TC6-ESN or TC6-FN coupling, the rubber cap must be replaced.

Attachment Method

1 Loosen the bolts and remove the clamp from the nipple.
2 Pass the rubber cap through the hose.
*Refer to the instruction manual for the insertion volume of the rubber cap.
3 Insert the rubber cap all the way to the end of the nipple.
4 Align the clamp to the nipple groove and temporarily assemble.
* Center the triangle symbol on the rubber cap so there is no gap.
5 Alternately tighten the two bolts evenly until no gap remains.
If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap.
*The model shown is the TOYOCONNECTOR TC6-CS.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-FN50) to finish tightening the bolt.

Related Products