Couplings for food, beverage, and chemical equipment and facility piping (for HYBRID TOYOFOODS-N Hoses)

TOYOCONNECTOR TC6-ESN

  • Model | TC6-ESN
  • Material | Stainless steel

Features

  • Leak and disconnection prevention
  • Easy installation
  • Fluid accumulation prevention
  • Hygienic

Product features

  • Leak and disconnection prevention

    The hook on the clamp engages with the groove on the coupling body, preventing hose disconnection. This makes operation safe and reduces defect loss caused by production problems.

  • Easy installation

    Quicker and easier insertion thanks to the coupling insert being the same size as the hose.

  • Fluid accumulation prevention

    High resistance to fluid residue build-up at the end of the coupling and on the inner surface of the hose ensures a hygienic design.

  • Hygienic

    Rust-resistant and hygienic stainless-steel design (equivalent to SUS 316L, SUS 304).

  • Overview
  • Support /
    Downloads
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC6-ESN

Couplings for food, beverage, and chemical equipment and facility piping (for HYBRID TOYOFOODS-N Hoses)

Hose side
Dedicated clamp
Hose inner diameter (mm)
38, 50
KAMLOK
Adapter
Connection size
1-1/2, 2
Model No. TC6-ESN
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
  • Fluid accumulation prevention
  • Arm safety lock
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics
Legal compliance RoHS 2 compliant
Material details Nipple, Clamp SCS14 (SUS316 equivalent)
Bolt SUSXM7 (SUS304 equivalent)
Rubber cap EPDM
Spacer, Washer (50 size only) Polyacetal
Bolt thread part lubricant NSF "H1" registered grease

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) No. of packaged items
HEX L ΦC
TC6-ESN38 38 1-1/2" 6 113 53 4
TC6-ESN50 50 2" 8 130 63 2

* Compatible with KAMLOK.

Precautions

*Designed as a coupling dedicated for HYBRID TOYOFOODS-N Hose.
*This coupling is not for routine disassembly cleaning.
*Connect with KAMLOK of the same material. It may lead to corrosion (electrical corrosion).

Compatible Hoses: 1

Coupling material
Hose name HYBRID TOYOFOODS-N HOSE
Main material Soft PVC
Operating temperature range -5℃~50℃
Model No. HTF-N
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC6-ESN38
38
1-1/2"
TC6-ESN50
50
2"
 
 
  Product Name   Applicable Coupling Part Number Packing Unit
Clamp Set
Details:
Clamp body … 1pc each (left/right)
Bolt … 2pcs
Spacer … 1pc
Washer … 1pc
(50 size only)
TC6-F38-CBSS TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S
1set
TC6-F50-CBSS TC6-CSN50
TC6-ESN50
TC6-FN50-2S
Rubber caps TC6-F38-GN TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S
4pcs
TC6-F50-GN TC6-CSN50
TC6-ESN50
TC6-FN50-2S
Clamp body: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Spacer, Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)
Rubber cap: EPDM

*When reusing the TC6-CSN, TC6-ESN or TC6-FN coupling, the rubber cap must be replaced.

Attachment Method

  1. 1 Loosen the bolts and remove the clamp from the nipple.

  2. 2 Pass the rubber cap through the hose.
    *Refer to the instruction manual for the insertion volume of the rubber cap.

  3. 3 Insert the rubber cap all the way to the end of the nipple.

  4. 4 Align the clamp to the nipple groove and temporarily assemble.
    * Center the triangle symbol on the rubber cap so there is no gap.

  5. 5 Alternately tighten the two bolts evenly until no gap remains.
    If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap.

*The model shown is the TOYOCONNECTOR TC6-CS.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-ESN50) to finish tightening the bolt.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.