Couplings for food, beverage, and chemical equipment and facility piping (for HYBRID TOYOFOODS-N Hoses)

TOYOCONNECTOR TC6-CSN

  • Model | TC6-CSN
  • Material | Stainless steel

Features

  • Leak and disconnection prevention
  • Improved workability
  • Fluid accumulation prevention
  • Safe

Product features

  • Leak and disconnection prevention

    The hook on the clamp engages with the groove on the coupling body, preventing hose disconnection. This makes operation safe and reduces defect loss caused by production problems.

  • Improved workability

    Featuring a cam arm locking function for easy adapter insertion.

  • Fluid accumulation prevention

    High resistance to fluid residue build-up at the end of the coupling and on the inner surface of the hose ensures a hygienic design.

  • Safe

    Featuring a locking function that prevents the cam arm from coming off accidentally.

  • Overview
  • Support /
    Downloads
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC6-CSN

Couplings for food, beverage, and chemical equipment and facility piping (for HYBRID TOYOFOODS-N Hoses)

Hose side
Dedicated clamp
Hose inner diameter (mm)
38, 50
KAMLOK
Coupler
Connection size
1-1/2, 2
Model No. TC6-CSN
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
  • Fluid accumulation prevention
  • Arm safety lock
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics
Legal compliance RoHS 2 compliant
Material details Nipple, Clamp, Cam arm SCS14 (SUS316 equivalent)
Arm fixing part, Pin, Ring, Spring SUS304
Bolt SUSXM7 (SUS304 equivalent)
Gasket Silicone rubber *At shipment, a silicone rubber gasket is installed. If the fluid used is oil, replace it with the gasket (Buna-N / Black) included with the product.
Rubber cap EPDM
Spacer, Washer (50 size only) Polyacetal
Bolt thread part lubricant NSF "H1" registered grease

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) No. of packaged items
A B HEX L ΦC
TC6-CSN38 38 1-1/2" 184 93 6 106 54 4
TC6-CSN50 50 2" 193 103 8 122.5 63.3 2

* Compatible with KAMLOK.

Precautions

*Designed as a coupling dedicated for HYBRID TOYOFOODS-N Hose.
*This coupling is not for routine disassembly cleaning.
*Connect with KAMLOK of the same material. It may lead to corrosion (electrical corrosion).

Compatible Hoses: 1

Coupling material
Hose name HYBRID TOYOFOODS-N HOSE
Main material Soft PVC
Operating temperature range -5℃~50℃
Model No. HTF-N
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC6-CSN38
38
1-1/2"
TC6-CSN50
50
2"
 
 
  Product Name   Applicable Coupling Part Number Packing Unit
Clamp Set
Details:
Clamp body … 1pc each (left/right)
Bolt … 2pcs
Spacer … 1pc
Washer … 1pc
(50 size only)
TC6-F38-CBSS TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S
1set
TC6-F50-CBSS TC6-CSN50
TC6-ESN50
TC6-FN50-2S
Rubber caps TC6-F38-GN TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S
4pcs
TC6-F50-GN TC6-CSN50
TC6-ESN50
TC6-FN50-2S
Clamp body: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Spacer, Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)
Rubber cap: EPDM

*When reusing the TC6-CSN, TC6-ESN or TC6-FN coupling, the rubber cap must be replaced.

Attachment Method

  1. 1 Loosen the bolts and remove the clamp from the nipple.

  2. 2 Pass the rubber cap through the hose.
    *Refer to the instruction manual for the insertion volume of the rubber cap.

  3. 3 Insert the rubber cap all the way to the end of the nipple.

  4. 4 Align the clamp to the nipple groove and temporarily assemble.
    * Center the triangle symbol on the rubber cap so there is no gap.

  5. 5 Alternately tighten the two bolts evenly until no gap remains.
    If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap.

*The model shown is the TOYOCONNECTOR TC6-CS.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-CSN50) to finish tightening the bolt.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.