Product Code: TC6-ESN TOYOCONNECTOR-TC6-ESN
- RoHS2 Certified
TOYOCONNECTOR TC6-ESN Coupling (Dedicated Coupling for HYBRID TOYOFOODS-N Hose)
A coupling for equipment and devices handling foods, beverages, chemicals and the like (Dedicated Coupling for HYBRID TOYOFOODS-N Hose)
TOYOCONNECTOR is a hose manufacturer designed coupling exclusively for TOYOX hoses.
*Compatible with KAMLOK
(Material: SUS/Clamp type/Couplings Specification: KAMLOK ADAPTER)
The structure that suppresses fluid accumulation is sanitary. Reduction of leakage and disconnection troubles will increase production efficiency. Reduction of piping work time and standardization of work.
Important
*It is designed as a coupling dedicated for HYBRID TOYOFOODS-N Hose.
*This coupling is not for routine disassembly cleaning.
*Connect with KAMLOK of the same material. It may lead to corrosion (electrical corrosion).
- Guidance
- Coupling Design Chart
- List of Compatible Hoses
| Connection Surface | Connection Method | Inner Diameter for Hose (mm) |
|---|---|---|
| Hose Side | Clamp | 38, 50 |
| Product no. | ： | TC6-ESN |
|---|---|---|
| Fluids | ： | Air Chemicals Drinking Water Foods Oils Water (Non-drinkable) |
| Primary Material | ： |
SUS |
| Materials Detail | ： | Nipple, Clamp: SCS14 (SUS316 equivalent) Bolt: SUSXM7 (SUS304 equivalent) Rubber cap: EPDM Spacer · Washer (50 size only): Polyacetal Bolt thread part lubricant: NSF "H1" registered grease |
| Functionality | ： | Easy to installLocks safely with armPrevents leakage and disconnectionPrevents liquid poolingReusableStandardization of work |
| Certification | ： |
RoHS2 (RoHS Revised) Certified |
Feature:
-
Easy coupling insertion
Say goodbye to the insertion difficulties of conventional couplings!
The coupling is extremely easy to insert into the genuine Toyox hose for improved workflow. -
Prevents leaks and disconnections
A dedicated clamp is attached to prevent hose disconnections and fluid leakage.
-
Sanitary
Designed so that fluids do not accumulate between the coupling tip and the hose for sanitary operation.
Worksite Improvement Case Studies
| TOYOCONNECTORTC6-ESN | ||||||||
| Coupling exterior | Schematic Drawing | |||||||
|---|---|---|---|---|---|---|---|---|
 |
 |
|||||||
| Part Number | Coupling Specs | Dimensions (mm) | Packing Unit | |||||
| Inch | L | Φd | F | Φc | HEX | pc | ||
| TC6-ESN38 | 1-1/2” | 113.0 | 32.0 | 88.0 | 53.0 | 6 | 4 | |
| TC6-ESN50 | 2” | 130.0 | 43.0 | 106.0 | 63.0 | 8 | 2 | |
*Compatible with KAMLOK
Bolt: SUSXM7 (SUS304 equivalent)
Rubber cap: EPDM
Spacer · Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF "H1" registered grease
| Compatible Hoses : 1 | Hoses Name | HYBRID TOYOFOODS-N HOSE | |
|---|---|---|---|
 Material : SUS | Primary Material | Vinyl | |
| Functionality | Break Proof Flexible No Waste Sorting Required Oil Resistant (Animal and Vegetables) Oil Resistant (Mineral) Pressure Transparent Vacuum | ||
| Product no. | HTF-N | ||
| Certification | RoHS2 Certified | ||
| Product Code | Compatible Hoses Inner Diameter(mm) | Coupling Specification |  |
| TC6-ESN38 | 38 | 1-1/2" | ◯ |
| TC6-ESN50 | 50 | 2" | ◯ |
 |
Product Name | Applicable Coupling Part Number | Packing Unit | |
|---|---|---|---|---|
| Clamp Set
Details: |
TC6-F38-CBSS | TC6-CSN38 TC6-ESN38 TC6-FN38-1.5S |
1set | |
| TC6-F50-CBSS | TC6-CSN50 TC6-ESN50 TC6-FN50-2S |
|||
| Rubber caps | TC6-F38-GN | TC6-CSN38 TC6-ESN38 TC6-FN38-1.5S |
4pcs | |
| TC6-F50-GN | TC6-CSN50 TC6-ESN50 TC6-FN50-2S |
Clamp body: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Spacer, Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)
Rubber cap: EPDM
*When reusing the TC6-CSN, TC6-ESN or TC6-FN coupling, the rubber cap must be replaced.
Attachment Method
| 1 | Loosen the bolts and remove the clamp from the nipple. |  |
| 2 | Pass the rubber cap through the hose. *Refer to the instruction manual for the insertion volume of the rubber cap. |
 |
| 3 | Insert the rubber cap all the way to the end of the nipple. |  |
| 4 | Align the clamp to the nipple groove and temporarily assemble. * Center the triangle symbol on the rubber cap so there is no gap. |
 |
| 5 | Alternately tighten the two bolts evenly until no gap remains. If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap. |
 |
| *The model shown is the TOYOCONNECTOR TC6-CS. |
Attachment Tool
Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-ESN50) to finish tightening the bolt.
Related Products
-
- RoHS2 Compliant
Serial Number : HTF-N
HYBRID TOYOFOODS-N HOSE
For delivering foods, beverages, water and more
Break Proof, Flexible, No Waste Sorting Required, Oil Resistant (Animal and Vegetables), Oil Resistant (Mineral), Pressure, Transparent, Vacuum,
Temperature Range: : -5 ℃ ~ 50 ℃
-
- RoHS2 Compliant
Serial Number : TC6-CSN
TOYOCONNECTOR TC6-CSN Coupling
A coupling for equipment and devices handling foods, beverages, chemicals and the like (Dedicated Coupling for HYBRID TOYOFOODS-N Hose)
Locks safely with arm, Prevents liquid pooling, Easy to install, Prevents leakage and disconnection, Reusable, Standardization of work,
Primary Material: : SUS
-
- RoHS2 Compliant
Serial Number : TC6-FN
TOYOCONNECTOR TC6-FN Coupling
A coupling for equipment and devices handling foods, beverages, chemicals and the like (Dedicated Coupling for HYBRID TOYOFOODS-N Hose)
Locks safely with arm, Prevents liquid pooling, Easy to install, Prevents leakage and disconnection, Reusable, Standardization of work,
Primary Material: : SUS
-
- RoHS2 Compliant
Serial Number : TLHA
TOYOCONNECTOR TLHA Coupling
A coupling for equipment and devices handling foods, beverages, chemicals and the like (FERRULE adapter couplings for KAMLOK COUPLER)
Primary Material: : SUS
