Couplings for food, beverage, and chemical equipment and facility piping (for HYBRID TOYOFOODS-N Hoses)

TOYOCONNECTOR TC6-FN

  • Model | TC6-FN
  • Material | Stainless steel

Features

  • Fluid accumulation prevention
  • Leak and disconnection prevention
  • Standardization of work
  • Hygienic

Product features

  • Fluid accumulation prevention

    Hygienic design with a nipple shape that prevents fluid accumulation, making it ideal for food and beverage products.

  • Leak and disconnection prevention

    A dedicated clamp is attached to prevent hose disconnections and fluid leakage.

  • Standardization of work

    Fully tighten the clamp to complete the installation. Even hose insertion is easy, helping ensure uniform installation even when completed by different workers.

  • Hygienic

    Rust-resistant and hygienic stainless-steel design (equivalent to SUS 316L, SUS 304).

  • Overview
  • Support /
    Downloads
  • Compatible Hoses
  • Replacement Parts /
    Installation Methods

TOYOCONNECTOR TC6-FN

Couplings for food, beverage, and chemical equipment and facility piping (for HYBRID TOYOFOODS-N Hoses)

Hose side
Dedicated clamp
Hose inner diameter (mm)
38, 50
Device side
Ferrule
Coupling specifications
1.5S, 2S
Model No. TC6-FN
Main material
  • Stainless steel
Function
  • Easy insertion
  • Standardization of work
  • Leak and disconnection prevention
  • Reuse
  • Fluid accumulation prevention
  • Arm safety lock
Fluid Water (non-potable) Air Oil Food and beverage Chemicals and cosmetics
Legal compliance RoHS 2 compliant
Material details Nipple SUS316L
Clamp SCS14 (SUS316 equivalent)
Bolt SUSXM7 (SUS304 equivalent)
Rubber cap EPDM
Spacer, Washer (50 size only) Polyacetal
Bolt thread part lubricant NSF "H1" registered grease

Coupling specifications

Model Compatible hose
inner diameter (mm)
Coupling specifications Dimensions (mm) No. of packaged items
A B C HEX L
TC6-FN38-1.5S 38 1-1/2" 50.5 43.5 35.7 6 77 4
TC6-FN50-2S 50 2" 64 56.5 47.8 8 89 2

Precautions

*Designed as a coupling dedicated for HYBRID TOYOFOODS-N Hose.
*When connecting the FERRULE, use a packing for ISO ferrule couplings.
*This coupling is not for routine disassembly cleaning.

Compatible Hoses: 1

Coupling material
Hose name HYBRID TOYOFOODS-N HOSE
Main material Soft PVC
Operating temperature range -5℃~50℃
Model No. HTF-N
Coupling model
Compatible hose nominal inner diameter (mm)
Coupling specifications
TC6-FN38-1.5S
38
1-1/2"
TC6-FN50-2S
50
2"
 
 
  Product Name   Applicable Coupling Part Number Packing Unit
Clamp Set
Details:
Clamp body … 1pc each (left/right)
Bolt … 2pcs
Spacer … 1pc
Washer … 1pc (50 size only)
TC6-F38-CBSS TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S
1set
TC6-F50-CBSS TC6-CSN50
TC6-ESN50
TC6-FN50-2S
Rubber caps TC6-FS50-CBSS TC6-CSN38
TC6-ESN38
TC6-FN38-1.5S
TC6-F50-GN
4pcs
TC6-F50-GN TC6-CSN50
TC6-ESN50
TC6-FN50-2S
材質 /
Clamp body: SCS14 (SUS316 equivalent)
Bolt: SUSXM7 (SUS304 equivalent)
Spacer, Washer (50 size only): Polyacetal
Bolt thread part lubricant: NSF “H1” registered grease (extreme-pressure grease)
Rubber cap: EPDM

*When reusing the TC6-CSN, TC6-ESN or TC6-FN coupling, the rubber cap must be replaced.

Attachment Method

  1. 1Loosen the bolts and remove the clamp from the nipple.

  2. 2Pass the rubber cap through the hose.
    *Refer to the instruction manual for the insertion volume of the rubber cap.

  3. 3Insert the rubber cap all the way to the end of the nipple.

  4. 4Align the clamp to the nipple groove and temporarily assemble.
    * Center the triangle symbol on the rubber cap so there is no gap.

  5. 5Alternately tighten the two bolts evenly until no gap remains.
    If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap.
    *The model shown is the TOYOCONNECTOR TC6-CS.

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-FN50) to finish tightening the bolt.

Page Top

To proceed further,
you will need to log in.

To proceed further,
please register as a new member or log in.