Do not use fuel oil in the TOYOFUSSO Hose Series.

We do not produce hoses that can be used with fuel oil.

Yes. Be sure to ground or bond the hose clamp. Failure to ground may cause the hose clamp to become an isolated conductor, accumulating static electricity and leading to electrical discharge or ignition. Note that hoses with an antistatic band on the hose exterior (TOYOTOP-E Hose, TOYOTOP-E 100°C Hose, and TOYOFOODS EARTH Hose) are designed with a structure that does not generate static electricity on the surface of the hose (to a degree that static electricity could accumulate on the clamp).

Click here for TOYOFUSSO-E Hoses

Although you can used anything with a sharp blade to cut PVC hose containing hard steel wire, we recommend using an end nipper capable of cutting through hard steel wire. Check out our videos on how to cut PVC hose containing hard steel wire.

Click here to see helpful videos

Many of our dealers will cut hoses to the desired length. Please consult with your local dealer for available sizes and pricing.

Yes, depending on lead times and quantities, we do our best to provide custom lengths. Please note that prices may differ. Consult with your local dealer for details.

Yes. All are ISO2852 ferrule groove compatible parts. When connecting, use a packing for ISO ferrule couplings.

Click here for ferrule-type couplings

Male coupling is for sanitary use. It is not compatible with pipe thread.

The HC model comes with a gasket, but the other couplings do not and must be provided for separately. Toyox does not sell gaskets separately. TOYOX provides KAMLOK gaskets separately, but not other coupling packings.

The TOYOCONNECTOR Series can be reused except for the all-resin type (TC3-PC). Be sure to replace the sleeve (or rubber cap depending on the product) when reusing. Also, note that it is not designed to be frequently attached or detached as in the case of disassembly cleaning.

TOYOCONNECTORS adjust the length of the hose on-site Fittings can be attached by tightening a cap nut with a wrench. (Check the type of TOYOCONNECTOR and which hoses are compatible) Hose assemblies are specified by hose size, length, couplings, and are assembled by the manufacturer. (Check compatible hose and fitting types) Both are dedicated fittings for TOYOX hoses. *Crimping product fittings are not for individual sale.

Click here to search for products (industrial couplings)

You can purchase a set containing a cam arm, pin and ring. Please let us know the material and size of your cam arm when ordering this.

Click here for the cam arm replacement procedure

Yes, it can. The fitting areas of the 1/2″ coupler and 3/4″ adapter are the same size. Likewise, a 3/4″ coupler can be connected to a 1/2″ adapter.

MIL standard lever type couplings and KAMLOK are compatible. However, the gasket specifications are different between companies. Our warranty only covers fittings and gaskets of the same manufacturer. Make sure that the size and material are the same.

For each material, the Dust Cap 634-B is available for couplers and the Plug Cap 634-A for adapters. However, they cannot be used in applications where pressure is applied or to prevent leakage. It is only for protection from dust and foreign matter.

KAMLOK is a coupling composed of male (adapter) and female (coupler) that can be easily attached and detached by tightening or loosening the lever (arm). KAMLOK is available in types that connect to hoses, devices, equipment and piping materials. Also, aluminum alloy, stainless steel, bronze and polypropylene (PP) types are available to meet various applications, fluids and usage conditions.

All hose bands are RoHS2 compatible. Certificates are available if necessary. Necessary survey reports can be downloaded by registering as a member. Feel free to use them as needed.

Click here to download certificates

Safety caps for safety bands are not sold separately. In addition, you cannot attach a safety cap to the tip of another manufacturer’s hose band. In addition, do not use the product once the safety cap has been removed.

The maximum tightening torque in the band specification table is guaranteed by the manufacturer. Exceeding it may cause damage or the band tightening function to deteriorate. There is no proper torque value. There are many hose hardnesses, wall thicknesses and coupling types. Setting up is difficult as it depends on which part of the barb to be attached. To solve such issues, we offer special couplings for tightening cap nuts called TOYOCONNECTOR that do not require torque management.

To securely connect the parts, fasten the clamp in the middle of the peak of the barb, above the depression. Do not fasten it immediately below the hexagonal area of the nipple. We recommend using two clamps if the hose size is greater than 1″ (25mm).