- QIs the flange in the KAMLOK with Flange set compliant with JIS 10K?
- A
Models such as the KAMLOK 633LAS and 633LBS have a flange that is compliant with JIS 10K.
- QCan a 1/2″ coupler be connected to a 3/4″ adapter?
- A
Yes, it can. The fitting areas of the 1/2″ coupler and 3/4″ adapter are the same size. Likewise, a 3/4″ coupler can be connected to a 1/2″ adapter.
- QIs the KAMLOK compatible with lever type coupling made by other companies?
- A
MIL standard lever type couplings and KAMLOK are compatible. However, the gasket specifications are different between companies. Our warranty only covers fittings and gaskets of the same manufacturer. Make sure that the size and material are the same.
- QIs it okay to connect two KAMLOK made of different materials? For example, is it safe to connect an aluminum KAMLOK with a stainless steel one?
- A
Connect with KAMLOK of the same material. Problems may occur due to electrical corrosion or wear.
- QI tried to insert a KAMLOK hose shank into a common suction hose, but it was difficult. Is there a good way to insert it?
- A
There are methods such as warming the hose insertion part with warm water and applying soap water to the hose shank. Also, it is possible to change the 633-CT coupler and 633-ET adapter with a slightly narrower hose shank.
- QIs KAMLOK available in NPT thread type?
- A
We do not carry NPT thread type.
All products are PT thread type.
- QIs KAMLOK adapter 633-AB-3/4 available with a different thread diameter of 1/2?
- A
The KAMLOK adapter 633-AB-1/2 has internal thread diameter of 1/2.
Only KAMLOK 1/2 and 3/4 have the same fitting size, and available screw standards are 1/2 and 3/4.
*Except products made of PP
The same applies to 633-FB.
- QI want to mount the Dust Plug 634-A to the KAMLOK 633-DB-1/2. Do the 1/2 and 3/4 KAMLOK have the same fitting?
- A
KAMLOK’s mating size is shared between 1/2 and 3/4 sizes. Therefore, the 1/2 and 3/4 sizes of the dust plug and dust cap are the same.
