Hose Clamps Related FAQ

To securely connect the parts, fasten the clamp in the middle of the peak of the barb, above the depression. Do not fasten it immediately below the hexagonal area of the nipple. We recommend using two clamps if the hose size is greater than 1″ (25mm).

Safety caps for safety bands are not sold separately. In addition, you cannot attach a safety cap to the tip of another manufacturer’s hose band.

In addition, do not use the product once the safety cap has been removed.

All hose bands are RoHS2 compatible. Certificates are available if necessary.

Necessary survey reports can be downloaded by registering as a member. Feel free to use them as needed.

Certificates are made available for download by registering on our website.

In addition to SDS, material certificate, product specifications, Food Sanitation Act and FDA compliance certificate, we also offer catalog downloads and CAD drawing downloads.
Feel free to register.

*Some products may not be listed. In such case, feel free to contact us.

The maximum tightening torque in the band specification table is guaranteed by the manufacturer. Exceeding it may cause damage or the band tightening function to deteriorate. There is no proper torque value. There are many hose hardnesses, wall thicknesses and coupling types. Setting up is difficult as it depends on which part of the barb to be attached.

To solve such issues, we offer special couplings for tightening cap nuts called TOYOCONNECTOR that do not require torque management.