Font size
Small
Middle
Large

Return to previous page

HYBRID TOYOSILICONE HOSE (Food Grade Silicone Hose)

Zoom
Applications For factory equipment (such as filling machines, cooling devices and heat-generating equipment)
Fluids Oils Chemicals (including gases, pure water) Foods (including fats) Powder Air Water, Hot water
Material Silicone rubber Reinforcement material Specially-designed heat-resistant fibers
Features
  • Easy disposal:
  • Meets Food Sanitation Act:
  • Insulating:
  • Shape-retaining:
  • Low elution:
  • Low odor:
  • Chemical-resistance:
  • Oil-resistance:
  • Transparence:
  • Flexibility:
  • Heat-resistance:
  • Vacuum feed:
  • Pressure feed:

Temperature range -30°C-130°C
Specifications Standards chart by size Genuine couplings

Caution!

① Under no circumstances should these hoses be used for nonpolar organic solvents (such as benzene, toluene and hexane), halogenated hydrocarbons (such as methylene chloride or trichloroethane), concentrated strong acids, strong bases, mineral oil or steam. Also, do not use for animal or vegetable oil at temperatures exceeding 70°C.

② Do not use for high temperature water at exceeding 100°C. Due to weakened reinforcement (thread), it can cause a hose puncture and secondary damage such as injury and burn.

[Resistant to breaking and crushing] Reduces product loss and problems due to fluid stoppage.
[Resistant to high heat] Capable of withstanding fluids at up to 130° C, the HYBRID TOYOSILICONE Hose can be cleaned inside when used for food and can be used for floor cleaning. (Certain restrictions apply.)
[Perfect for narrow spaces] Perfect for spaces with narrow bends and for use in the drive parts of filling machines.
[Vacuum safe] Can be used in suction applications up to -0.05 MPa.
[Fluid verification] The transparency of the HYBRID TOYOSILICONE Hose allows confirmation of the fluid inside.
[Retains its original shape] Made with resin, not metal, reinforcement, the HYBRID TOYOSILICONE Hose returns to its original shape if crushed for a long life.
[Eliminates rust worries] The special, heat-resistant resin reinforcement material means no rusting for safe, worry-free and sanitary performance.
[Waste sorting not needed ] The reinforcing material is made of special, heat-resistant resin, so no sorting is needed for disposal.
[Compliant with laws and regulations] Fully compliant with the Food Sanitation Act (Ministry of Health, Labour and Welfare Public Notice Nos. 595 of 2012 and 52 of 1951) and FDA standards for safe performance.
Can be used safely as a food hose.
FDA DMF Type Ⅱ ( No. 25486 )

Note: This hose does not use phthalate plasticizers.

Made of silicone rubber and able to handle pressure and vacuum feeds, and pressure, the HYBRID TOYOSILICONE Hose has the excellent features of silicone such as heat resistance up to 130° C, low leaching, insulation, and no odor. It can be used in equipment for the food and beverage industry, semiconductor industry, industrial furnace industry and more. Because of the special, heat-resistant resin coil, the HYBRID TOYOSILICONE Hose is more resistant to rust than the TOYOSILICONE-S and is excellently suited for narrow spaces because of the added flexibility. Also, the full lineup of genuine Toyox couplings provides excellent production efficiency.

Standards Chart by Size

Standards Chart by Size

Product no. Inner dia. × Outer dia. Use pressure Standard length Standard weight Minimum bend radius Reinforced construction Color Packaging
mm MPa m Kg/Roll mm Roll
HTSI-12 12.7×19.5 -0.05~0.5 10 2.1 80

A special weave construction and special, heat-resistant resin coil

With milky green lines

BOX

HTSI-15 15.9×24.0 10 3.1 105
HTSI-19 19.5×28.5 10 4.2 140
HTSI-25 25.4×35.5 10 6.3 190
HTSI-32 32.0×43.5 10 9.0 240
HTSI-38 38.1×50.5 10 11.8 290
 
Note: Range of temperature -30°C to 130°C

 



Genuine Couplings

  Hose size TOYOCONNECTOR
(Nut fastening couplings)
Taper male thread for pipes TOYOCONNECTOR-F

TOYOCONNECTOR

TC3-FS

SUS SUS SCS
TC3-SS TCFS TC3-FS
Hose part no. Inner dia. Outer dia. TC3-SS TCFS-1 TC3-FS
HTSI-12 12.7 19.5 OK    
HTSI-15 15.9 24 OK   OK
HTSI-19 19.5 28.5 OK
OK
OK
HTSI-25 25.4 35.5 OK OK OK
HTSI-32 32 43.5   OK  
HTSI-38 38.1 50.5   OK  

  Hose size Fastening couplings
FERRULE HEXAGON HEAD THREAD MALE KAMLOK Taper male thread for pipes Parallel female thread for pipes
SUS SUS SUS SUS SUS SUS
HF HNT HM HC H01 H04
Hose part no. Inner dia. Outer dia. HF HNT-1 M-1 HC-1 H01 H04
HTSI-12 12.7 19.5 OK       OK OK
HTSI-15 15.9 24 OK          
HTSI-19 19.5 28.5 OK OK     OK OK
HTSI-25 25.4 35.5 OK OK OK OK OK OK
HTSI-32 32 43.5 OK OK OK OK    
HTSI-38 38.1 50.5 OK OK OK OK    

  Hose size KAMLOK
KAMLOK COUPLER HOSE SHANK TWINLOK COUPLER HOSE SHANK
(with locking feature)
Aluminum SUS PP Aluminum SUS PP
633C AL 633C SST 633C PP 633CL AL 633CL SST 633CL PP
Hose part no. Inner dia. Outer dia. 633CAL 633CSST 633CPP 633CLAL 633CLSST 633CLPP
HTSI-19 19.5 28.5 OK OK OK      
HTSI-25 25.4 35.5 OK OK OK OK OK OK
HTSI-32 32 43.5 OK OK   OK OK  
HTSI-38 38.1 50.5 OK OK OK OK OK OK

 

  Hose size KAMLOK 
KAMLOK ADAPTER HOSE SHANK
Aluminum SUS PP
633E AL 633E SST 633E PP
Hose part no. Inner dia. Outer dia. 633EAL 633ESST 633EPP
HTSI-19 19.5 28.5 OK OK OK
HTSI-25 25.4 35.5 OK OK OK
HTSI-32 32 43.5 OK OK  
HTSI-38 38.1 50.5 OK OK OK


Precautions Click here to contact us by e-mail


Page top



Copyright 1997-2010 © TOYOX CO., LTD. All Rights Reserved.