Font size
Small
Middle
Large

Return to previous page

TOYOSILICONE HOSE (Food Grade Silicone Hose)

Zoom
Applications For factory equipment (such as filling machines, cooling devices and heat-generating equipment)
Fluids Oils Chemicals (including gases, pure water) Foods (including fats) Powder Air Steam Water, Hot water
Material Silicone rubber Reinforcement material Polyester threads
Features
  • Easy disposal:
  • Meets Food Sanitation Act:
  • FDA compliance:
  • Insulating:
  • Low elution:
  • Low odor:
  • Chemical-resistance:
  • Oil-resistance:
  • Transparence:
  • Flexibility:
  • Heat-resistance:
  • Pressure feed:

Temperature range -30°C-150°C
Specifications Standards chart by size Genuine couplings

Caution!

① Under no circumstances should these hoses be used for nonpolar organic solvents (such as benzene, toluene and hexane), halogenated hydrocarbons (such as methylene chloride or trichloroethane), concentrated strong acids, strong bases, mineral oil or steam. Also, do not use for animal or vegetable oil at temperatures exceeding 70°C. For steam cleaning, apply for a short time with a saturated steam pressure of less than 0.2 MPa at 130°C.

② Do not use for high temperature water at exceeding 100°C. Due to weakened reinforcement (thread), it can cause a hose puncture and secondary damage such as injury and burn.

[Resistant to high heat] Capable of withstanding fluids at up to 150° C, the TOYOSILICONE Hose can be cleaned inside when used for food and can be used for floor cleaning (certain restrictions apply).
[Excellent for low-temperature feeds ] Flexible even in sub-freezing conditions such as for filling or conveyance.
[Coupling disassembly for fast cleaning] Food hoses with genuine couplings can be disassembled for cleaning, saving time.
The coupling construction keeps liquid pooling at an absolute minimum.
[Compliant with laws and regulations] Fully compliant with Public Notice Nos. 52 and 595 of the Food Sanitation Act, as well as FDA standards
Can be used safely as a food hose.
FDA DMF Type Ⅱ ( No. 25486 )
[Special reinforcement to prevent bursting] The innovative reinforcement construction ensures more reliable performance without threads unraveling or ruptures near the coupling.
[High insulation] A higher level of insulation than with vinyl chloride, appropriate for the semiconductor and electronics industries.
[Flavorless and odorless] The materials do not leach and there is no odor, providing worry-free conveyance for foods, beverages and more.
Can be used safely as a food or beverage hose.
[Fluid verification ] The transparent TOYOSILICONE Hose allows confirmation of the fluid inside.

[Lightweight and adaptable]

Roughly 30% lighter than ordinary rubber hoses to make work more efficient.
This hose does not use phthalate plasticizers.

Note: This hose does not use phthalate plasticizers.

Made of silicone rubber and able to handle pressure feeds, pressure and heat, the TOYOSILICONE Hose has the excellent features of silicone such as heat resistance up to 150°C, and low leaching, insulation, and no odor. It can be used in equipment for the food and beverage industry, semiconductor industry, industrial furnace industry and more. Also, the full lineup of genuine Toyox couplings provides excellent production efficiency.

The Benefits of Toyox – a video series

Standards Chart by Size

Product no. Inner dia. × Outer dia. Use pressure Range of temperature Standard weight Standard length Minimum bend radius Reinforced construction Packaging Color
mm MPa kg/Roll m mm
TSI-5 4.8×10.6 0~1.0 -30~150 1.8 20 70 Special weave Box With milky green lines
TSI-540 3.6 40
TSI-6 6.3×12.3 0~1.0 2.3 20 80
TSI-640 4.6 40
TSI-8 7.9×14.3 0~1.0 2.9 20 90
TSI-840 5.8 40
TSI-9 9.5×16.0 0~1.0 3.2 20 100 Special weave
TSI-940 6.4 40
TSI-12 12.7×19.5 0~0.5 2.1 10 130
TSI-1220 4.2 20
TSI-15 15.9×24.0 0~0.5 3.1 10 150
TSI-1520 6.2 20
TSI-19 19.0×28.0 0~0.5 4.1 10 180
TSI-1920 8.2 20
TSI-25 25.4×35.5 0~0.5 5.9 10 220
TSI-2520 11.8 20
TSI-32 32.0×43.5 0~0.5 8.5 10 250
TSI-3220 17.0 20
TSI-38 38.1×50.5 0~0.5 10.5 10 310
TSI-3820 21.0 20
TSI-50 50.8×64.5 0~0.3 7.9 5 550
TSI-5010 15.8 10

 

TOYOSILICONE CONNECTOR ALL IN HOSE

TOYOSILICONE CONNECTOR ALL IN Hose
   
[Prevents contamination] Because there is no nipple, liquids do not pool inside. The contamination prevention provides sanitary performance.
[Reduced cleaning time] Disassembly is not required for washing, which saves time.
[Prevents leaks and disconnections] The coupling is integrated, preventing hose disconnections and fluid leaks.
[Prevents wicking] Liquid does not wick along the reinforcing threads of the hose end, which means sanitary performance.
[Prevents alteration] Since there is no nipple, the fluid flowing through the hose maintains its integrity because it does not come into contact with metal inside the hose.
FDA DMF Type Ⅱ ( No. 25486 )
     

TOYOSILICONE CONNECTOR ALL IN Hose

 Structural analysis

    How liquid pooling is prevented

 

Couplings Couplings
part no.
Hose part no. Hose size Size (mm)
TOYOSILICONE CONNECTOR ALL IN HOSE
(Integrated coupling)
A B C H
TOYOSILICONE CONNECTOR ALL IN Hose
TOYOSILICONE CONNECTOR ALL IN Hose
NLF-19 TSI-19 1S 50.5 43.5 22.8 32.0
NLF-25 TSI-25 1S 50.5 43.5 25.4 27.0

Note: When ordering, please specify the type of coupling and the length of the hose.

 

Tolerance ranges for hose assembly length according to JISB8360
Assembly length (mm) Tolerance range (mm)
to 499 +10 0
500 to 999 +15 0
1000 to 1999 +20 0
2000 to 4999 +1.0% 0
over 5000 +2.0% 0

 

 

TOYOSEAL TOYOSILICONE Hose end treatment

TOYOSEAL加工
   
[Keeps reinforcing threads clean] By creating a complete seal on the end of the hose, fluids are prevented from reaching the reinforcing threads, and dirt is also prevented from attaching to the reinforcing threads at the end of the hose.
[Cleaner hoses] Because fluids cannot penetrate to the reinforcing threads, the hoses stay cleaner.
Sanitation management is also made much easier in-process and in the plant.
TOYOSEAL is registered with the FDA. FDA Drug Master File Type II (number 25486)
Please read the below precautions before use.


TOYOSEAL treatment standards

Product no. Corresponding hose number Size (mm)
A B C D
TYSL-19 TSI-19 19 28 30 8
TYSL-25 TSI-25 25.4 35.5 38 10
TOYOSEAL treatment standards
  Precautions
  1. After the TOYOSEAL treatment, use is not possible with TOYOSILICONE dedicated couplings (the TOYOCONNECTOR-F and TOYOCONNECTOR) or fastening couplings.
  2. When attaching a hose band, avoid the part that has been treated with TOYOSEAL (the part with the wide end surface).

Genuine Couplings

Hose size TOYOCONNECTOR
(Nut fastening couplings)
Integrated coupling
Taper male thread for pipes Taper male thread for pipes FERRULE FERRULE
SUS SUS SUS SUS
TCSBS TC3-SS TCFS NLF
Hose part no. Inner dia. Outer dia. TCSBS-1 TCFS-1 TCFS-1 NLF
TSI-5 4.8 10.6        
TSI-6 6.3 12.3        
TSI-8 7.9 14.3        
TSI-9 9.5 16 OK OK    
TSI-12 12.7 19.5 OK OK    
TSI-15 15.9 24 OK OK    
TSI-19 19 28 OK OK OK OK
TSI-25 25.4 35.5 OK OK OK OK
TSI-32 32 43.5     OK  
TSI-38 38.1 50.5     OK  
TSI-50 50.8 64.5        


 

Hose size Fastening couplings
FERRULE HEXAGON HEAD THREAD MALE KAMLOK Taper male thread for pipes Parallel female thread for pipes
SUS SUS SUS SUS SUS SUS
HF HNT HM HC H01 H04
Hose part no. Inner dia. Outer dia. HF HNT-1 M-1 HC-1 H01 H04
TSI-5 4.8 10.6            
TSI-6 6.3 12.3            
TSI-8 7.9 14.3            
TSI-9 9.5 16 OK       OK OK
TSI-12 12.7 19.5 OK       OK OK
TSI-15 15.9 24 OK          
TSI-19 19 28 OK     OK OK OK
TSI-25 25.4 35.5 OK OK OK OK OK OK
TSI-32 32 43.5 OK OK OK OK    
TSI-38 38.1 50.5 OK OK OK OK    
TSI-50 50.8 64.5 OK OK OK OK    


 

  Hose size KAMLOK
KAMLOK COUPLER HOSE SHANK TWINLOK COUPLER HOSE SHANK
 (with locking feature)
Aluminum SUS PP Aluminum SUS PP
633C AL 633C SST 633C PP 633CL AL 633CL SST 633CL PP
Hose part no. Inner dia. Outer dia. 633CAL 633CSST 633CPP 633CLAL 633CLSST 633CLPP
TSI-5 4.8 10.6            
TSI-6 6.3 12.3            
TSI-8 7.9 14.3            
TSI-9 9.5 16            
TSI-12 12.7 19.5            
TSI-15 15.9 24            
TSI-19 19 28 OK OK OK      
TSI-25 25.4 35.5 OK OK OK OK OK OK
TSI-32 32 43.5 OK OK   OK OK  
TSI-38 38.1 50.5 OK OK OK OK OK OK
TSI-50 50.8 64.5 OK OK OK OK OK OK

  Hose size KAMLOK 
KAMLOK ADAPTER HOSE SHANK
Aluminum SUS PP
633E AL 633E SST 633E PP
Hose part no. Inner dia. Outer dia. 633EAL 633ESST 633EPP
TSI-5 4.8 10.6      
TSI-6 6.3 12.3      
TSI-8 7.9 14.3      
TSI-9 9.5 16      
TSI-12 12.7 19.5      
TSI-15 15.9 24      
TSI-19 19 28 OK OK OK
TSI-25 25.4 35.5 OK OK OK
TSI-32 32 43.5 OK OK  
TSI-38 38.1 50.5 OK OK OK
TSI-50 50.8 64.5 OK OK OK
 


Precautions Click here to contact us by e-mail


Page top



Copyright 1997-2010 © TOYOX CO., LTD. All Rights Reserved.