Font size
Small
Middle
Large

TOYOCONNECTOR-TC6-S Coupling


TC6-S
Zoom
  Applications Hoses for factory equipment and couplings built into machinery (Toyox hose genuine couplings) Because of the presence of threads, this is not appropriate for sanitary hoses (such as used for foods). Use may result in safety issues in the product.
Material Stainless steel
Details Nipple: SCS 13 stainless steel, equivalent to SUS 304
Clamp: SCS 14 stainless steel, equivalent to SUS 316
Rubber cap: nitrile rubber
Spacer, washer (50-mm size only): polyacetal
Bolt: SUS XM7, equivalent to SUS 304
Bolt/screw lubricant: NSF “H1” registered grease
Specifications
Other

Coupling Features

· Precautions for use · User's Manual
[Prevents leaks and disconnections] Hose insertion is easy, and the clamp fits on with no gap, preventing hose disconnections and fluid leaks.
[Time savings] Hose insertion and removal is easy for increased efficiency.
[Standardization of work (hyojunka)] Fasten the clamp fully to complete the operation. Hose insertion is simple and can be performed reliably and consistently no matter who does it.
[Reduced pressure loss] There is less fluid leakage, and there is a larger effective surface area (hole diameter) than with a barb fitting (see Table 1) for reduced pressure loss.
[Durable] The hose end fitting and nipple are integrated, to keep the fluid from coming into contact with the packing inside the coupling. Fluids need to be resistant to the coupling body but not the packing.
[Waste reduction] Coupling units can be reused, reducing waste and cutting costs.
[Resistant to vibration] Hose problems due to leaks and disconnections caused by vibration are prevented, and earthquake and other disaster preventive maintenance, as well as restoration work after a disaster is made easy.
[Easy attachment with no special tools] The clamp can be tightened with a motor wrench, Allen wrench and other types of wrenches.
 

Note: The TOYOCONNECTOR-TC6-S Coupling is compliant with the revised regulations of the RoHS 2.

AttachmentTC6-S

Troubleshooting Examples

Structural Analysis

Coupling Standards Chart

Precaution: Because of the presence of threads, this is not appropriate for sanitary hoses (such as used for foods). *Use for foods may result in safety issues in the product.

Product no. Screw standards Size (mm) Weight Packaging quantity TC6-S
L Φd1 F HEX1 HEX2 g Pieces
TC6-S
TC6-S
TC6-S32-R1-1/4 R1-1/4 86.0 27.0 81.0 46 6 540 4
TC6-S38-R1-1/2 R1-1/2 93.0 32.0 88.0 55 6 720 4
TC6-S50-R2 R2 110.0 43.0 106.0 70 8 1,250 2

Note: Material: SCS 13 (equivalent to SUS 304) clamp, NBR (rubber cap), polyacetal (spacer, washer (50-mm size only)), SUS XM7 (equivalent to SUS 304) (bolt), bolt screw lubricant: NSF “H1” registered grease.

List of Compatible Hoses

*Pressure and temperature ranges are based on the standards of compatible hoses.

TOYOCONNECTOR-TC6-S Compatible Hoses
TC6-S TOYORON SUPER TOYORON TOYOSPRING TOYORING TOYOFOODS
TR ST TS TG TFB
TOYORON SUPER TOYORON TOYOSPRING TOYORING TOYOFOODS
Vinyl chloride Vinyl chloride Vinyl chloride Vinyl chloride Vinyl chloride
Oil-resistant inner liner Oil-resistant Oil-resistant Oil-resistant Oil-resistant
    Vacuum Vacuum Heat-resistant
Materials: Brass Easy to cut
Product no. Compatible
hose sizes
by diameter (mm)
Screw standards          
TC6-S32-R1-1/4 32 R1-1/4 OK OK OK OK OK
TC6-S38-R1-1/2 38 R1-1/2 OK OK OK OK OK
TC6-S50-R2 50 R2 OK OK OK OK OK
TOYOCONNECTOR-TC6-S Compatible Hoses
TC6-S TOYOFOODS-S TOYORING-F ECORON ECORON-S TOYOFUSSO TOYOFUSSO-S
TFS TGF EC ECS FF FFS
TOYOFOODS-S TOYORING-F ECORON ECORON-S TOYOFUSSO TOYOFUSSO-E
Vinyl chloride Vinyl chloride Polyolefins Polyolefins Fluorine Fluorine
Oil-resistant Oil-resistant For indoor use only For indoor use only Food-grade Food-grade
Heat-resistant Heat-resistant Chemical-resistant Chemical-resistant Chemical-resistant Chemical-resistant
Vacuum Vacuum   Vacuum Non-adhering Non-adhering
Materials: Brass Easy to cut   Vacuum
Product no. Compatible
hose sizes
by diameter (mm)
Screw standards            
TC6-S32-R1-1/4 32 R1-1/4 OK OK OK OK OK OK
TC6-S38-R1-1/2 38 R1-1/2 OK OK OK OK OK OK
TC6-S50-R2 50 R2 OK OK OK OK OK  

List of Replacement Parts

Replacement rubber cap

Replacement rubber cap

 

Replacement clamp set

Replacement clamp set

Product no. Compatible TOYOCONNECTOR Packaging qty. Product no. Compatible TOYOCONNECTOR Packaging qty.
Pieces Pieces
TC6-32-G TC6-S32-R1-1/4 4 TC6-32-CBSS TC6-S32-R1-1/4 1
TC6-38-G TC6-S38-R1-1/2 4 TC6-38-CBSS TC6-S38-R1-1/2 1
TC6-50-G TC6-S50-R2 2 TC6-50-CBSS TC6-S50-R2 1

The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer's hose.

 

Attachment method

See how to attach it on video
1 First loosen the bolt and detach the clamp from the nipple, and attach the nipple to the machine. Fig. 1. Attachment method
2

Pass the rubber cap through the hose.
Note: Refer to the user’s manual for instructions on how far to insert the rubber cap.

Fig. 2. Attachment method
3 Insert the rubber cap all the way to the end of the nipple. Fig. 3. Attachment method
4 Align the clamp to the nipple groove and temporarily assemble. Note: Center the triangle symbol on the rubber cap so there is no gap. Fig. 4. Attachment method
5 Alternately tighten the two bolts evenly until no gap remains.
Fig. 5. Attachment method

Attachment Tool

Use an Allen wrench at least 180 mm in length (at least 200 mm for the TC6-S50) to finish tightening the bolt.
Attachment Tool

使用说明&注意事项 +81-765-52-3131

Page top



Copyright 1997-2011 © TOYOX CO., LTD. All Rights Reserved.