Font size
Small
Middle
Large

TOYOCONNECTOR-TC6-CS Coupling


tc6_cs
Zoom
  Applications A coupling for equipment and devices handling foods, beverages, chemicals and the like
Material Stainless steel
Details Nipple, cam arm: SCS14 (equivalent to SUS 316)
Clamping plate, ring, pin, spring: SUS 304
Gasket: Silicone rubber
Clamp: SCS14 (equivalent to SUS 316)
Rubber cap: EPDM
Spacer, washer (50-mm size): Polyacetal
Bolt: SUSXM7 (equivalent to SUS 304)
Bolt thread lubricant: NSF H1 certified grease
Specifications
Other

Coupling Features

· Precautions for use · User's Manual
[Prevents leaks and disconnections] Attaches securely to the hose with a special sleeve construction, eliminating fluid leaks and hose disconnections.
[Labor savings] Additional tightening is not needed for reduced maintenance.
[Standardization of work (hyojunka)] Easy attachment that only requires securely fastening the clamp. As the hose opening is the same size as the hose, it is easy to insert the hose making it possible to install pipes in a short amount of time.
[Sanitary] The shape of the nipple prevents liquid pooling, making it sanitary and perfect for conveying foods and beverages.
[Can be installed on-site] Unlike products requiring tightening, the hose length can be adjusted on-site for easy installation.
[Waste reduction] Coupling units can be reused, reducing waste and cutting costs.
[Risk reduction] The TOYOCONNECTOR-TC6-CS prevents hose problems such as leaks and disconnections due to vibration. If there is an earthquake or other disaster, it is easy to restore everything back to working order.
 

Note: The TOYOCONNECTOR-TC6-CS Coupling is compliant with the revised regulations of the RoHS 2.

Structural Analysis

Coupling Standards Chart

Coupling exterior Schematic drawing
TC6-CS
TC6-CS
Schematic drawing TC6-CS
Product no. Coupling standards
Size (mm) Weight Packaging quantity
L φd A B φC F HEX2 g Pieces
TC6-CS 38 1-1/2" 106.0 32.0 184.0 93.0 54.0 88.0 6 1,050 4
TC6-CS 50 2 122.5 43.0 193.0 103.0 63.3 106.0 8 1,400 2

 

List of Compatible Hoses

*Pressure and temperature ranges are based on the standards of compatible hoses.

TOYOCONNECTOR TC6-CS Compatible Hoses
TC6-CS TOYOFOODS TOYOFOODS-S TOYORING-F ECORON ECORON-S
TFB TFS TGF EC ECS
TOYOFOODS TOYOFOODS-S TOYORING-F ECORON ECORON-S
Vinyl chloride Vinyl chloride Vinyl chloride Polyolefin Polyolefin
Food-grade Food-grade Food-grade Food-grade Food-grade
Heat-resistant Heat-resistant Heat-resistant For indoor use only For indoor use only
  Vacuum Vacuum Chemical-resistant Chemical-resistant
Materials: Stainless steel     Easy to cut   Vacuum
Product no. Compatible
hose sizes
by diameter (mm)
Coupling standards          
TC6-CS 38 38 1-1/2" OK OK OK OK OK
TC6-CS 50 50 2" OK OK OK OK OK
TOYOCONNECTOR TC6-CS Compatible Hoses
TC6-CS TOYOFUSSO TOYOFUSSO-S
FF FFS
TOYOFUSSO TOYOFUSSO F
Fluorine Fluorine
Food-grade Chemical-resistant
Heat-resistant Non-adhering
Non-adhering Vacuum
Materials: Stainless steel    
Product no. Compatible
hose sizes
by diameter (mm)
Coupling standards    
TC6-CS 38 38 1-1/2" OK OK
TC6-CS 50 50 2" OK  

List of Replacement Parts Note: The replacement parts for the TC6-CS are the same as for the TC6-F.

Replacement rubber cap
Replacement clamp set
Product no. Compatible TOYOCONNECTOR part no. Packaging quantity
Pieces
TC6-F 38-G TC6-CS 38 4
TC6-F 50-G TC6-CS 50 4
Replacement clamp set
Replacement clamp set
Product no. Compatible TOYOCONNECTOR part no. Packaging quantity
Pieces
TC6-F 38-CBSS TC6-CS 38 1
TC6-F 50-CBSS TC6-CS 50 1

The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. We cannot guarantee the performance or the ability to maintain the product if a non-TOYOX hoses is connected.

Attachment Method

See how to attach it on video

 

1 Loosen the bolts and remove the    clamp from the nipple. Attachment Method
2

Place the rubber cap over the hose.

* Refer to the instruction manual for the insertion volume of the rubber cap.

Attachment Method
3 Insert the hose equipped with the rubber cap into the base of the hose opening of the nipple. Attachment Method
4 Provisionally assemble the clamp in line with the grooves on the nipple.
*Adjust the triangle marking of the rubber cap to be positioned in the center of the gap.
5 Fasten the 2 bolts evenly while alternating and fasten these until there are no gaps.
If there is a gap that cannot be closed completely, let the assembly sit and then tighten again to eliminate the gap.
When fastening the unit, there rarely may be cases when resin or metal dust (or stringy shavings) is generated. Be sure to remove such prior to use.

Attachment Tool

Be sure to use a "hex wrench" that is at least 180mm long to fasten the bolts ( at least 200mm long for TC6-CS50 ).
Attachment Tool
Instructions Click here to contact us by e-mail

Page top



Copyright 1997-2011 © TOYOX CO., LTD. All Rights Reserved.