Font size
Small
Middle
Large

TOYOCONNECTOR-TC3-FS Coupling


TC3-FS
Zoom
  Applications A coupling for equipment and devices handling foods, beverages, chemicals and the like
Material Stainless steel
Details Cap nut: SCS 13 (SUS 304 equivalent)
Sleeve: PVDF
Nipple: SCS 16 (SUS 316L)
Specifications
Other

Coupling Features

[Prevents leaks and disconnections]

Attaches securely to the hose with a cap nut, eliminating fluid leaks and hose disconnections.

[Standardization of work (hyojunka)] Fasten the cap nut fully to complete the operation.
Work can be performed reliably and consistently regardless of the person doing the job.
[Reusable] Fastened with a cap nut, the TCFS coupling is economical because it can be used again and again, unlike caulked fittings.
[Sanitary] Coupling units can be reused, reducing waste and cutting costs.
The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer’s hose.
[Waste reduction] Coupling units can be reused, reducing waste and cutting costs.
[Reduced washing time] The shape of the nipple prevents liquid pooling, so disassembly is not required for washing, which saves time.
[Can be installed on-site] The cap nut coupling makes attachment easy, allowing the hose to be simply cut to length where it will be used, unlike caulked fittings.

AttachmentTC3-FS

Structural Analysis

Coupling Standards Chart

Coupling exterior Schematic drawing
TC3-FS
TC3-FS
Schematic drawing
Product no. Compatible hose sizes by diameter (mm) Range of temperature Coupling Specs Size (mm) Weight Packaging quantity
L φd1 Width across flat A

B

C HEX g Pieces
TC3-FS15-15A 15 -30 to 140 FERRULE 15A 57.5 13.3 21.0 34.0 27.5 17.5 30.8 212 20
TC3-FS15-1S 1S 59.0 13.3 27.0 50.5 43.5 23.0 30.8 283 10
TC3-FS19-15A 19 15A 59.5 16.9 21.0 34.0 27.5 17.5 35.8 248 10
TC3-FS19-1S 1S 61.0 16.9 27.0 50.5 43.5 23.0 35.8 317 10
TC3-FS25-1S 25 1.5S 64.5 22.8 27.0 50.5 43.5

23.0

43.8 407 10

1. When attaching the hose and coupling. -0.1 MPa is an approximate value. The TCFS may not be used for all applications and under all conditions. Read the precautions.
2. Numbers in parentheses refer to connections to the TOYOSILICONE-S (TSIS).

List of Compatible Hoses

*The TOYOCONNECTOR-F can be used up to a maximum pressure of 0.5 MPa.
When using in combination with the TOYOSILICONE-S, the maximum pressure is -0.1 to +0.5 MPa.

TOYOCONNECTOR-F Compatible Hoses
TC3-FS TOYOSILICONE HYBRID TOYO SILICONE TOYOSILICONE-P TOYOSILICONE-S
TSI HTSI TSIP TSIS
TOYOSILICONE HYBRID TOYOSILICONE TOYOSILICONE-P TOYOSILICONE-S
Silicone rubber Silicone rubber Silicone rubber Silicone rubber
Heat-resistant Heat-resistant Heat-resistant Heat-resistant
Insulated Insulated Insulated Insulated
Food-grade Food-grade Food-grade Food-grade
Materials: SUS   Vacuum Vacuum Vacuum
Product no. Coupling Specs        
TC3-FS15-15A 15A OK OK OK
TC3-FS15-1S 1S OK OK OK
TC3-FS19-15A 15A OK OK OK OK
TC3-FS19-1S 1S OK OK OK OK
TC3-FS25-1S 1.5S OK OK OK OK

Replacement sleeve set

Replacement sleeve set

Replacement sleeve set
Product no. Packaging quantity
Pieces
TC3-FS15-S 20
TC3-FS19-S 10
TC3-FS25-S 10

The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. Toyox makes no guarantee that the TOYOCONNECTOR will function properly if connected to another manufacturer’s hose.

Attachment Method

See how to attach it on video

 

1 Remove the cap nut from the nipple. Attachment
2 Pass the cap nut through the hose. Attachment
3 Insert the hose to the back of the nipple.
Note: Check to ensure that the sleeve bottom pins and the nipple pin holes are in alignment before inserting the hose to the hose opening surface.
Attachment
Attachment
4 Fasten the cap nut firmly so as to leave no gap.
Note: Use a commercially available sanitary clamp to secure the hose to the pipe.
Note: Make sure the hose is not twisted when attaching to the pipe.
Attachment

Attachment Tool

Use a wrench such as a regular adjustable or monkey wrench to finish tightening. Do not, however, use a pipe wrench as it will damage the nut portion.
Attachment Tool
Instructions Click here to contact us by e-mail

Page top



Copyright 1997-2011 © TOYOX CO., LTD. All Rights Reserved.