Font size
Small
Middle
Large

TOYOCONNECTOR-TC3-CS Coupling


tc3_cs
Zoom
  Applications A coupling for equipment and devices handling foods, beverages, chemicals and the like
Material Stainless steel
Details Nipple, cam arm: SCS14 (equivalent to SUS 316)
Clamping plate, ring, pin, spring: SUS 304
Gasket: Silicone rubber
Cap nut: SCS13 (equivalent to SUS 304)
Sleeve: Polyacetal
Packing: Silicone rubber
Specifications
Other

Coupling Features

· Precautions for use · User's Manual
[Prevents leaks and disconnections]

Attaches securely to the hose with a special sleeve construction, eliminating fluid leaks and hose disconnections.

[Labor savings] Additional tightening is not needed for reduced maintenance.
[Standardization of work (hyojunka)] The cap nut means no bothersome clamp position adjustments or torque control so work can be standardized.
[Sanitary] The shape of the nipple prevents liquid pooling, making it sanitary and perfect for conveying foods and beverages.
[Can be installed on-site] Unlike products requiring tightening, the hose length can be adjusted on-site for easy installation.
[Waste reduction] Coupling units can be reused, reducing waste and cutting costs.
[Risk reduction] The TOYOCONNECTOR-TC3-CS prevents hose problems such as leaks and disconnections due to vibration. If there is an earthquake or other disaster, it is easy to restore everything back to working order.
 

Note: The TOYOCONNECTOR-TC3-CS Coupling is compliant with the revised regulations of the RoHS 2.

Structural Analysis

Coupling Standards Chart

Coupling exterior Schematic drawing
TC3-CS
TC3-CS
Schematic drawing TC3-CS
Product no. Coupling standards
Size (mm) Weight Packaging quantity
L φd1 A B φC HEX g Pieces
TC3-CS 19 3/4" 62.5 17.0 112.0 66.0 32.4 36 350 10
TC3-CS 25 1" 73.0 22.5 139.0 82.0 37.3 42 550 8

 

List of Compatible Hoses

*Pressure and temperature ranges are based on the standards of compatible hoses.

TOYOCONNECTOR TC3-CS
Compatible Hoses
TC3-CS TOYOFOODS HYBRID TOYOFOODS TOYOFOODS-S TOYORING-F
TFB HTF TFS TGF
TOYOFOODS HYBRID TOYOFOODS TOYOFOODS-S TOYORING-F
Vinyl chloride Vinyl chloride Vinyl chloride Vinyl chloride
Food-grade Food-grade Food-grade Food-grade
Heat-resistant Heat-resistant Heat-resistant Heat-resistant
    Vacuum Vacuum
Materials: Stainless steel       Easy to cut
Product no. Compatible
hose sizes
by diameter (mm)
Coupling standards        
TC3-CS 19 19 3/4" OK OK - OK
TC3-CS 25 25 1" OK OK OK OK
TOYOCONNECTOR TC3-CS
Compatible Hoses
TC3-CS ECORON ECORON-S TOYOFUSSO TOYOFUSSO-E TOYOFUSSO-S
EC ECS FF FFE FFS
ECORON ECORON-S TOYOFUSSO TOYOFUSSO-E TOYOFUSSO-E
Polyolefin Polyolefin Fluorine Fluorine Fluorine
Food-grade Food-grade Food-grade Food-grade Food-grade
For indoor use only For indoor use only Chemical-resistant Chemical-resistant Chemical-resistant
Chemical-resistant Chemical-resistant Non-adhering Non-adhering Non-adhering
Materials: Stainless steel   Vacuum   Prevents static electricity Vacuum
Product no. Compatible
hose sizes
by diameter (mm)
Coupling standards          
TC3-CS 19 19 3/4" OK - OK OK OK
TC3-CS 25 25 1" OK OK OK OK OK

List of Replacement Parts Note: The replacement parts for the TC3-CS are the same as for the TC3-F.

Replacement sleeve set
Replacement sleeve set
Product no. Compatible TOYOCONNECTOR part no. Packaging quantity
Pieces
TC3-F19-RSS TC3-CS19 10
TC3-F25-RSS TC3-CS 25 10

The TOYOCONNECTOR is designed as a genuine coupling for Toyox hoses. We cannot guarantee the performance or the ability to maintain the product if a non-TOYOX hoses is connected.

Attachment Method

See how to attach it on video

 

 
1 Twist the cap nut to remove it from the nipple. Attachment Method
2 Pass the hose through the cap nut and then the TC3-CS sleeve with packing. Attachment Method
3 Insert the hose into the nipple. For best results, use the table at right to find the correct hose insertion length and mark the hose before inserting. As shown in the figure at right, there is a small hole that can be used to check when the hose is inserted to the proper length. Attachment Method
4 As shown in Fig. 1, use a monkey or motor wrench to fasten the flat part of the nipple, and tighten until there is no gap between the nipple and the cap nut.

Attachment Tool

Use a wrench such as a regular adjustable or monkey wrench to finish tightening. Do not, however, use a pipe wrench as it will damage the nut portion.
Attachment Tool
Instructions Click here to contact us by e-mail

Page top



Copyright 1997-2011 © TOYOX CO., LTD. All Rights Reserved.